Fit The Sensors Yourself
A practical screw-on setup. Match each labelled sensor to its wheel, secure the lock nuts, then set the receiver to your vehicle’s recommended limits.
Keep four tyre readings in sight on long drives, with pressure and temperature alerts.
It monitors four tyres with screw-on external valve sensors. Check valve fit before use; see our fitting FAQ below.
No. Solar power supports the dashboard receiver. Each external sensor uses a replaceable battery.
Try Roadstead for 30 days from delivery. Not for you? Contact us for a full refund. We pay for the return.
A practical screw-on setup. Match each labelled sensor to its wheel, secure the lock nuts, then set the receiver to your vehicle’s recommended limits.
See the whole set at a glance. Four external sensors send tyre pressure and temperature readings to one compact dashboard receiver.
Keep readings close. Place the receiver securely in daylight without blocking your view. Solar supports dashboard charging.
Pack the gear. Check the tyres. Head out.
Keep the readings with you. Roadstead puts four tyre pressure and temperature readings on your dashboard, from the first highway stretch to the next country-road stop.
Yes. Keep your regular tyre checks.
Roadstead adds a dashboard view between them. It does not inflate your tyres or replace a gauge, tyre inspection or your vehicle’s recommended pressures.
If an alert sounds, stop somewhere safe and check the tyre.
Four sensors show pressure and temperature on your dashboard, so you can compare readings between travel stops.
Pressure and temperature alerts bring changes to your attention, so you can stop safely and check your tyres.
Fit the labelled external sensors to your four wheels, then secure them with the supplied lock nuts and spanner.
| Feature | Roadstead | Manual Gauge Alone |
|---|---|---|
| Check tyre pressure | Yes | Yes |
| See four readings together on your dashboard | Yes | No |
| Show tyre temperature readings | Yes | No |
| Receive pressure and temperature alerts | Yes | No |
Put the dashboard view to work on your next longer drive.
You have 30 days from delivery to try Roadstead on your drives and see how its four-tyre display fits your travel routine.
If it is not for you, contact us. We will refund you in full and pay for the return.
Roadstead monitors four tyres using external screw-on valve sensors. Check that your valve type and wheel clearance suit the sensors before fitting. It is a four-wheel system; it does not add extra trailer-wheel monitoring.
Park safely. Fit each labelled sensor to its matching wheel: FL, FR, RL or RR. Use the supplied nuts and spanner to secure them. Follow the included setup instructions.
The solar panel supports charging for the dashboard receiver only. The four valve sensors use replaceable batteries. Follow the supplied instructions for charging and battery care.
Stop somewhere safe and check the tyre with a gauge. Inspect it for damage and use your vehicle’s recommended pressures. The monitor cannot repair or inflate a tyre.
You get one solar dashboard receiver, four labelled external sensors, four locking nuts and a spanner. The sensors cover the front-left, front-right, rear-left and rear-right tyres.
Try Roadstead for 30 days from delivery. If it is not for you, contact us for a full refund. We pay for the return.
Try Roadstead on your drives for 30 days.
Not for you? Get a full refund.